KODAK PRODUCT PAGE     HOME ABOUT SERVICE PARTS BULLETINS MANUALS CONTACT

CESD TECHNICAL NEWSLETTER

Projectors/Movie Cameras

FOR KODAK PERSONNEL USE ONLY
September 5, 1986



Specia1 Adjustment Procedure for the Kodak Carousel Transevue 140 SLIDE TRAY
Purpose: To correct excessive noise or binds in the "advance" or "reverse"
 mode on Kodak Carousel Transevue, 140 SLIDE TRAYS, and to prevent
 future ocurrence of this symptom.

 Special Tools: Five Pound Sledge Hammer and Safety Glasses, Available at any hardware store.

 Perform this modification to all Kodak Carousel Transevue 140 SLIDE TRAYS.

 1. Place Kodak Carousel Transvue 140 SLIDE TRAY on floor.
2. Put Safety Glasses on.

 3. Take hammer in hand.

 4. Smash Kodak Transevue 140 SLIDE TRAY