|
|
PREVIOUS PAGE | 300 INDEX | B & H INDEX | MANUALS INDEX | NEXT PAGE |
|
| ITEM | PART NUMBER | DESCRIPTION |
| 1 | 022565 |
HEAD ASSEMBLY, Projection 360 series |
| 2 | 42372 |
COVER, Head pivot (adhesive backed) |
| 3 | 43823 |
SCREW, Shoulder |
| 4 | 42305 |
ARM, Head support (ream to 9/32) |
| 5 | 35975 |
DISC, Friction |
| 6 | 39437 |
WASHER, Flat |
| 7 | 700727 |
LOCKWASHER, split # 10 |
| 8 | 707051 |
NUT, Lockiang 10-24 |
| 9 | 204517 |
COVER, Mirror plate |
| 10 | 43547 |
SCREW, Thread cutting 4-40 X 5/16 inch |
| 11 | 43523 |
CLOP, Mirror hold-down bottom |
| 12 | 203493 |
MIRROR, Projection (first surfaced) |
| 13 | 36849 |
SCREW, Slotted pan head 8-32 X 1/2 inch |
| 14 | 43547 |
SCREW, Thread cutting 4-40 X 5/16 inch |
| 15 | 43547 |
SCREW, Thread cutting 4-40 X 5/16 inch |
| 16 | 202807 |
CLIP, Mirror hold-down top |
| 17 | 43534 |
HOUSING, Mirror |
| 18 | 82245 |
RING, Retaining, bowed 0.125 inch ID |
| 19 | 700606 |
WASHER, Flat |
| 20 | 43526 |
PIN, Pivot, upper |
| 21 | 43525 |
LEVER, Mirror adjusting |
| 22 | 32865 |
RING, Retaining, bowed 0.188 inch ID |
| 23 | 765029 |
WASHER, Thrust |
| 24 | 43528 |
BUSHING, Locking |
| 25 | 43531 |
KNOB, Locking |
| 26 | 19037 |
NUT, hex 8-32 |
| 27 | 42372 |
DISC, Locking know (adhesive backed) |
| 28 | 43527 |
BEARING, Pivot |
| 29 | 36853 |
SCREW, Slotted pan head 8-32 X 1 inch |
| 30 | 43532 |
BRACKET, Mirror support |
| 31 | 30404 |
WASHER, Flat |
| 32 | 43524 |
PIN, Pivot, lower |
| 33 | 43547 |
SCREW, Thread cutting 4-40 X 5/16 inch |
| 34 | 43529 |
COPVER, Spring and element |
| 35 | 43521 |
RING, Lens element retaining |
| 36 | 43522 |
SPRING, Compression |
| 37 | 43530 |
HOLDER, spring |
| 38 | 203401 |
ELEMENT, Lens 1st |
| 39 | 203402 |
ELEMENT, Lens 2nd |
| 40 | 43520 |
SPACER, Lens element |
| 41 | 203403 |
ELEMENT, Lens 3rd |
| 42 | 43535 |
BASE, Projection head |
|
|
PREVIOUS PAGE | 300 INDEX | B & H INDEX | MANUALS INDEX | NEXT PAGE |
|
BH 300 Page 03 of 13 updated 05-2-2006